Sodium battery pack 24V-50Ah
| No. 序号 | Item 项目 | Rated Performance 产品性能 | Remark 备注 | |
| 1. | Cell Model 组合方式 | 8S5P | ||
| 2. | Communication Function 通讯功能 | / | 蓝牙可选
Bluetooth Optional |
|
| 3. | Way to work 工作方式 | Use alone or in parallel | ||
|
4. |
Rated Capacity 额定容量 | Typical
标称容量 |
50Ah |
Discharge at 0.2C5A after standard charge fully.
标准充电后 0.2C5A放电 |
| 5. | Nominal Voltage 标称电压 | 24.0V | ||
| 6. | Discharge cut-off voltage 放电终止电压 | 16V | ||
| 7. | Charging Voltage 充电截止电压 | 31.6V | ||
| 8. | Internal resistance 内阻 | ≤18m Ω | AC Impedance, 1KHz AC 1KHz 交流阻抗 | |
|
9. |
Standard Charge 标准充电 |
Constant current 0.5C5A charge to 31.6V,Then
constant voltage 31.6V to current below 0.05C5A cutoff. 恒流 0.5C5A充电至 31.6V， 然 后 恒 压 31.6V 至 电 流 低 于 0.05C5A截止。 |
Charge time: Approx 3.5h. 充电时间约 3.5 小时 |
|
|
10. |
Standard Discharge 标准放电 | Constant Current 0.2C5A end voltage 16V
恒流 0.2C5A 放电至 16V |
||
|
11. |
Fast Charge 快速充电 |
Constant current 1.0C5A charge to 31.6V,Then
constant voltage 31.6V to current below 0.05C5A cutoff. 恒流 1.0C5A充电至 31.6V， 然 后 恒 压 31.6V 至 电 流 低 于 0.05C5A截止。 |
Charge time : Approx 1.5h. 充电时间约 1.5 小时 |
|
| 12. | Fast Discharge 快速放电 | Constant Current 1.0C5A end voltage 16V
恒流 1.0C5A放电至 16V |
|
|
13. |
Maximum Continuous
Charge Current 最大持续充电电流 |
50A |
|
|
14. |
Maximum Continuous Discharge Current
最大持续放电电流 |
50A |
|
|
15. |
Discharge Pulse Current 放电脉冲电流 |
60A |
﹤3S |
|
16. |
Operation Temperature Range
工作温度范围 |
Charge: -10~60℃
充电：-10~60℃ |
60±25% RH. |
| Discharge: -30~60℃
放电：-30~60℃ |
|||
| 17. | Weight 重量 | Approx：13.4 Kg
约：13.4 Kg |
|
|
18. |
Product Dimension 产品尺寸 |
Height: 332±5mm
高度：332±5mm |
|
| Width: 172±5mm
宽度：172±5mm |
|||
| Thickness:219±5mm 厚度：219±5mm | |||
|
19. |
Energy Extension 能量扩展 |
Max. 2 units in parallel 最大支持 2 个单元并联 Max.Support up to 4 units in series 最大支持 4 个单元串联 |
The pressure difference of the battery should be less than
500mV when connected in parallel. 电池并联压差小于 500mV When used in series, the voltage of each unit should be consistent, otherwise it will affect the overall capacity 串联使用时各单元电压应一致， 否则将影响整体容量 |
| 20. | Ingress Protection 防护等级 | IP65 |
